Thickness 1mm Easily Attached Thermal Conductive Pad With Natural
Adhesive For Automotive Engine Control Units
The TIF®140-18-11E use a special process, with silicone as the base material, adding
thermal conductive powder and flame retardant together to make the
mixture to become thermal interface material. This is effective in
lower the thermal resistance between the heat source and the heat
sink.
Features:
> Good thermal conductive:1.8W/mK
> Naturally tacky needing no further adhesive coating
> Soft and Compressible for low stress applications
> Available in varies thickness
Applications:
> Cooling components to the chassis of frame
> High speed mass storage drives
> Heat Sinking Housing at LED-lit BLU in LCD
> LED TV and LED-lit lamps
> RDRAM memory modules
> Micro heat pipe thermal solutions
> Automotive engine control units
> Telecommunication hardware
> Handheld portable electronics
> Semiconductor automated test equipment (ATE)
| Typical Properties of TIF®100-18-11E Series |
| Color | Gray | Visual |
| Construction &Compostion | Ceramic filled silicone elastomer | ****** |
| Thickness | 0.020"(0.5mm)~0.200"(5.0MM) | ASTM D374 |
| Specific Gravity | 2.3g/cc | ASTM D792 |
| Hardness | 35 Shore 00 | ASTM 2240 |
| Operating Temp | -40 to 160℃ | ****** |
| Dielectric Breakdown Voltage | >5500 VAC | ASTM D149 |
| Dielectric Constant @1MHz | 3.7 MHz | ASTM D150 |
| Volume Resistivity | 4.0x1013 Ohm-meter | ASTM D257 |
| Flame rating | 94 -V0 | UL E331100 |
| Thermal conductivity | 1.8 W/m-K | ASTM D5470 |
Products specificatrion
Product Thicknesses: 0.020-inch to 0.200-inch (0.5mm to 5.0mm) ,Product Sizes: 8" x
16"(203mm x406mm)
Individual die cut shapes and custom thickness can be supplied.
Please contact us for confirming.
Peressure Sensitive Adhesive:
Request adhesive on one side with "A1" suffix.
Request adhesive on double side with "A2" suffix.
Reinforcement:
TIF series sheets type can add with fiberglass reinforced.
Company Profile
Ziitek company is a high-tech enterprise which dedicated to the
R&D, manufacture and sales of the thermal interface materials
(TIMs). We have rich experiences in this field which can support
you the latest, most effective and one -step thermal management
solutions. We have many advanced production equipments,full test
equipments and fully automatic coating production lines which can
support the production for high performance thermal silicone pad,
thermal graphite sheet/ film, thermal double-sided tape, thermal
insulation pad, thermal ceramic pad, phase change material, thermal
grease etc. UL94 V-0, SGS and ROHS are compliant.
Certifications:
ISO9001:2015
ISO14001: 2004 IATF16949:2016
IECQ QC 080000:2017
UL
Independent R&D team
Q: How do I place an order?
A:1. Click the "Sent messages" button to continue with the process.
2. Fill out the message form by entering a subject line, and
message to us.
This message should include any questions you might have about the
products as well as your purchase requests.
3. Click the "Send" button when you are finished to complete the
process and send your message to us.
4. We will reply you as soon as possible with Email or online.
